Brake Bleeder Hose - One Way Check Valve Tube Bleeding Tool Kit For Car Motorcyle Clutch
Materialļ¼Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen
One Way Check Valveļ¼Prevents air being drawn into the system
Easy to connectļ¼Simply and easy to connect with the clips to car motorcycle clutch for bleeding.
Easy to bleedļ¼Bleed car motorcycle brakes fluid fastly with this brake bleeder hose.
Remarkļ¼This car motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out.
Step1: Open
1. Open the brake bleeder nipple of the caliper
Step2: Connect the Hose
1. Place one end of the hose onto the bleed nipple and secure with hose clip(only recommend)
2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper
Step 3. Release and start press the brake Lever
3.1 Loose the brake bleeder Screw a little
3.2 Start pressing the brake Lever SLOWLY
3.3 Check until all air bubble has been flushed out
3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill
3. The package also includes 2 pcs of brake bleeder screw caps
